Upcoming Omron Training Courses
Seats are available on a first come, first served basis as most courses are limited to 10 participants. All available training courses & custom courses built to your specifications can be hosted at a location near you or at your own facility. For private or on-site training inquiries please contact us today: Contact us.
All training sessions start at 9am and end at 4pm with a half hour break for lunch.
* Dates to be announced. Training Terms & Conditions (PDF)
Available Omron Training Courses
Seats are available on a first come, first served basis as most courses are limited to 10 participants. All available training courses & custom courses built to your specifications can be hosted at a location near you or at your own facility. For private or on-site training inquiries please contact us today: Contact us.
| Human Machine Interface (NS) |
Duration |
Tuition |
| Prerequisite: |
C-Series 1 or CS/CJ PLC Level 1 |
2 Days |
$700 |
| Overview of NS hardware – Introduction to CX-Designer Software – Hands on NS Project Development – Integration of NS project and CS/CJ PLC ladder logic – Learn basic NS application maintenance and troubleshooting. |
| Variable Frequency Drives |
Duration |
Tuition |
| Prerequisite: |
NONE |
2 Days |
$700 |
| VFD installation issues – Inverter duty motors – V/Hz control, Flux Vector control – 3G3MV programming – P5+ and G5+ programming – Hands on labs to reinforce subjects introduced. |
| NE1A – Safety Network Controller |
Duration |
Tuition |
| Prerequisite: |
Basic understanding of safety standards & DeviceNet |
2 Days |
$700 |
| Hands on practice with Omron’s Programmable Safety Controller – Stand alone, safety network, and integration into a DeviceNet network – Wiring, Programming and system application examples. |
| DeviceNet – Design, Implementation & Maint. |
Duration |
Tuition |
| Prerequisite: |
CS/CJ PLC Level 1 |
2 Days |
$700 |
| DeviceNet Topology & system design – Master (scanner) & slave selection – Power supply & wiring methods – Mapping of I/O with automatic allocation & Configuration – Explicit messages & network programming with protocol pass-through – Troubleshooting – Maintenance with PLC memory & Configurator software. |
| Machine Vision |
Duration |
Tuition |
| Prerequisite: |
C-Series 1 or CS/CJ PLC Level 1 |
2 Days |
$700 |
| A practical study of Machine Vision equipment & programming techniques – This course covers lighting and lens selection – Measurement tools – Wiring – Communications – Output programming – Students will use the Vision System’s on-screen programming menus to set up scenes – Create measurement regions – Set judgment conditions – Multiple camera systems – Compact flash cards & other accessories will also be discussed. |
| Omron Sensors |
Duration |
Tuition |
| Prerequisite: |
NONE |
3 Days |
$900 |
| Sensors Training encompasses basic sensors including photo electrics, proximity sensors, smart sensors and the ZFV Vision sensor – This training provides a hardware overview and theory of operation, as well as a hands-on laboratory based component – Products featured in training include the E3Z, E3X-DA, E2A, ZX, ZS, and ZFV Sensors. |
| Temperature Control |
Duration |
Tuition |
| Prerequisite: |
NONE |
2 Days |
$700 |
| Non-mathematical review of PID control – Review of temperature sensors and related terminology – Application considerations – Overview of Omron temperature controllers – Practical lab exercises using E5-K controller. |
| CS/CJ PLC Level 1 |
Duration |
Tuition |
| Prerequisite: |
None |
3 Days |
$900 |
| Application of programmable controllers – Control system basics – Ladder diagram fundamentals – Basic binary logic functions – Memory instructions – General programming rules – Signal terminology – Transition sensitive instructions – Numbering systems – PLC memory allocation definitions – Addressing – Program execution – The PLC scan cycle – Limitations of scan dependent programs – Signal types – Hands on lab exercises using CX-Programmer and CS/CJ series CPUs |
| CS/CJ PLC Level 2 |
Duration |
Tuition |
| Prerequisite: |
None |
2 Days |
$700 |
| Application of Omron programmable controller – New features of CS/CJ PLC – Setting of CS/CJ PLC – Parallel program scan processing – Memory & addressing systems – Data types – Math instructions – indirect addressing using IR & DR index memory addresses – Special I/O Unit operation – Multi-tasking and interrupt tasks – Hands on lab exercises using latest version of CX-Programmer and CS/CJ-series CPUs – Programming with tasks, function blocks and functions (POU) following IEC61131-3 norm guidelines. Learn when and how to use the SFC, ST, IL and LD programming languages. |
Reserve Your Spot Now!
