 |
|
|
 |
· All Available Omron Training Courses |
 |
 |
Available Courses
The following training courses can be hosted at a location near you or at your own facility. For private or on-site training inquiries please contact us.
Request Course
| Human Machine Interface (NS) |
Duration |
Tuition |
| Prerequisite: |
C-Series 1 or CS/CJ PLC Level 1 |
2 Days |
$600 |
| Overview of NS hardware - Introduction to CX-Designer Software - Hands on NS Project Development - Integration of NS project and CS/CJ PLC ladder logic - Learn basic NS application maintenance and troubleshooting. |
Request Course
| Variable Frequency Drives |
Duration |
Tuition |
| Prerequisite: |
NONE |
2 Days |
$600 |
| VFD installation issues - Inverter duty motors - V/Hz control, Flux Vector control - 3G3MV programming - P5+ and G5+ programming - Hands on labs to reinforce subjects introduced. |
Request Course
| Canadian Safety Standards |
Duration |
Tuition |
| Prerequisite: |
NONE |
1 Day |
$300 |
| Overview of applicable machine safety standards, advanced machine safeguarding technologies and best practices. |
Request Course
| NE1A - Safety Network Controller |
Duration |
Tuition |
| Prerequisite: |
Basic understanding of safety standards & DeviceNet |
2 Days |
$600 |
| Hands on practice with Omron's Programmable Safety Controller - Stand alone, safety network, and integration into a DeviceNet network - Wiring, Programming and system application examples. |
Request Course
| DeviceNet - Design, Implementation & Maint. |
Duration |
Tuition |
| Prerequisite: |
CS/CJ PLC Level 1 |
2 Days |
$600 |
| DeviceNet Topology & system design - Master (scanner) & slave selection - Power supply & wiring methods - Mapping of I/O with automatic allocation & Configuration - Explicit messages & network programming with protocol pass-through - Troubleshooting - Maintenance with PLC memory & Configurator software. |
Request Course
| Machine Vision |
Duration |
Tuition |
| Prerequisite: |
C-Series 1 or CS/CJ PLC Level 1 |
2 Days |
$600 |
| A practical study of Machine Vision equipment & programming techniques - This course covers lighting and lens selection - Measurement tools - Wiring - Communications - Output programming - Students will use the Vision System's on-screen programming menus to set up scenes - Create measurement regions - Set judgment conditions - Multiple camera systems - Compact flash cards & other accessories will also be discussed. |
Request Course
| Omron Sensors |
Duration |
Tuition |
| Prerequisite: |
NONE |
3 Days |
$900 |
| Sensors Training encompasses basic sensors including photo electrics, proximity sensors, smart sensors and the ZFV Vision sensor - This training provides a hardware overview and theory of operation, as well as a hands-on laboratory based component - Products featured in training include the E3Z, E3X-DA, E2A, ZX, ZS, and ZFV Sensors. |
Request Course
| Temperature Control |
Duration |
Tuition |
| Prerequisite: |
NONE |
2 Days |
$600 |
| Non-mathematical review of PID control - Review of temperature sensors and related terminology - Application considerations - Overview of Omron temperature controllers - Practical lab exercises using E5-K controller. |
Request Course
| CP1-2GO |
Duration |
Tuition |
| Prerequisite: |
NONE |
1 Day |
$500 |
Assembly of CP1-2GO automation starter kit, hardware overview, basic software programming techniques, basic addressing and programming examples, expansion options for starter kit.
An Omron CP1-2GO Kit will be awarded to participants completing this course. |
Request Course
| CS/CJ PLC Level 1 |
Duration |
Tuition |
| Prerequisite: |
None |
3 Days |
$900 |
| Application of programmable controllers - Control system basics - Ladder diagram fundamentals - Basic binary logic functions - Memory instructions - General programming rules - Signal terminology - Transition sensitive instructions - Numbering systems - PLC memory allocation definitions - Addressing - Program execution - The PLC scan cycle - Limitations of scan dependent programs - Signal types - Hands on lab exercises using CX-Programmer and CS/CJ series CPUs |
Request Course
| CS/CJ PLC Level 2 |
Duration |
Tuition |
| Prerequisite: |
None |
2 Days |
$600 |
| Application of Omron programmable controller – New features of CS/CJ PLC – Setting of CS/CJ PLC – Parallel program scan processing – Memory & addressing systems – Data types – Math instructions – indirect addressing using IR & DR index memory addresses – Special I/O Unit operation – Multi-tasking and interrupt tasks – Hands on lab exercises using latest version of CX-Programmer and CS/CJ-series CPUs – Programming with tasks, function blocks and functions (POU) following IEC61131-3 norm guidelines. Learn when and how to use the SFC, ST, IL and LD programming languages. |
|
|
 |
 |
 |
|
|
 |
